Produktspecifikation
Välj en eller flera funktioner för att söka efter produkter med samma specifikationer.Processor | |
Processorfrekvens | 2565 MHz |
Grafikprocessor | GeForce RTX 4090 |
Maximal upplösning | 7680 x 4320 pixlar |
Stöd för parallellprocessteknik | Stöds inte |
Max antal skärmar per grafikkort | 4 |
CUDA | |
CUDA-kärnor | 16384 |
Grafikprocessorfamilj | NVIDIA |
Klockhastighet vid processor-boost | 2550 MHz |
FireStream | |
Minne | |
Grafikkortets minnestyp | GDDR6X |
Minneskapacitet | 384 bit |
Minnesbandbredd (max) | 21 GB/s |
Minneskapacitet, diskret grafikkort | 24 GB |
Anslutningar | |
Gränssnittstyp | PCI Express x16 |
Antal HDMI-portar | 1 |
HDMI-version | 2.1a |
Antal Displayportar | 3 |
DisplayPort-version | 1.4a |
Vikt & dimension | |
Vikt | 1.68 kg |
Höjd | 136 mm |
Djup | 62 mm |
Produktlängd | 322 mm |
Strömtillförsel | |
Strömförbrukning (vanlig) | 450 W |
Lägsta systemströmförsörjning | 850 W |
Kompletterande strömkontakter | 1x 16-pin |
Förpackning | |
Vikt inkl. förpackning | 2.31 kg |
Förpackningstyp | Låda |
Design | |
Formfaktor | Full-Height/Full-Length (FH/FL) |
Produktens färg | Svart, Vit |
Antal fläktar | 3 fläkt/-ar |
Kylning typ | Aktiv |
Nedkylningsteknik | MSI TORX Fan 4.0 |
Prestanda | |
Inbyggd TV mottagare | |
DirectX-version | 12 Ultimate |
OpenGL-version | 4.6 |
Dual Link-DVI | |
HDCP | |
NVIDIA G-SYNC | |
EAN | 4711377134958 |
Garanti | 1 år |
Source: Icecat.biz |
TAKE THE ESSENTIALS
VENTUS brings a fundamentally solid experience to users looking for a performance graphics card. A sharp-looking updated design with TORX FAN 4.0 and Airflow Control lets VENTUS breeze through any task.
REVOLUTIONARY
TRIPLE-FAN THERMAL
Three fans on a huge heatsink ensures a cool and quiet experience.
COREPIPE
Core Pipes are precision-crafted to make maximum use of the available space. A squared section of heat pipes fully touch the GPU baseplate to then spread heat along the full length of the heatsink.
COPPER BASEPLATE
Heat from the GPU and memory modules is immediately captured by a solid nickel-plated copper baseplate and then rapidly transferred to an array of heat pipes. This widening of the thermal transfer systems with highly efficient mechanisms improves overall efficiency.
AIRFLOW CONTROL
Stay stealthy with Airflow Control which improves airflow dynamics. Deflectors provide additional surface area and guide air to where it’s needed for maximum cooling.
TORX FAN 4.0
TORX FAN 4.0 is built on teamwork, with pairs of fan blades bound together with a linked outer ring design that focuses airflow into the Triple-Fan cooling system.
DrMos
DrMOS power stage solutions provide great efficiency with low power loss and enhanced voltage controls.
2 Oz Copper
A thickened copper layer inside the PCB increases conductivity which improves heat dissipation and reliability.
Fuse
Additional fuses built into the custom PCB provide additional safeguards against electrical damage.
Sheet-Metal Anti-Bending
A sheet-metal anti-bending plate reinforces the whole card while thermal pads allow cooling to reach critical component underneath.
Support Bracket
A bundled support bracket can be attached to your PC case for additional graphics card reinforcement.
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 18:00
Beräknad leverans: Ingen leverans information
Idag: 09:00 - 17:00
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 18:00
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 17:00
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 18:00
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 18:00
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 18:00
Beräknad leveranstid: Ingen leverans information
Beräknad leveranstid: Ingen leverans information
Beräknad leveranstid: Ingen leverans information
Beräknad leveranstid: Ingen leverans information
Beräknad leveranstid: Ingen leverans information
Beräknad leveranstid: Ingen leverans information